Welcome to EARTHTEK, a licensed and insured paving company that is committed to providing exceptional service and high-quality results for all of your paving projects. 

Our mission is to make paving projects easy and stress-free for our customers. At EARTHTEK, we understand that choosing the right paving contractor can be a daunting task, which is why we go above and beyond to provide you with the best value for your investment. We take pride in our ability to provide top-notch customer service and ensure that your expectations are exceeded every step of the way. 

Whether you need paving for your residential or commercial property, our team of experienced professionals is dedicated to delivering exceptional results that will last for years to come. Thank you for considering EARTHTEK for all of your paving needs.

Yes, we do. Before sending you a proposal, we will do a site walk with you to fully understand your paving project.

A driveway should have 2”-3” of asphalt at compaction. More importantly is the sub base thickness because it supports the asphalt. Typical driveways will have 4”-6” of compact aggregate for the subbase. Locations with clay soils, the subbase will need to be deeper or geotextile fabric will be used to help stabilize the soil.

We recommend you seal coat your driveway every three years. Parking lot sealcoating will range from every 2-3 years.

A light duty parking lot will have 3”-4” of asphalt. This is done in two lifts. The first lift called the binder lift, will be 2” and the finish lift 2”. The base will 5”-7” deep. Heavy duty parking lots with a significant amount of heavy weight traffic can have up to 6”-8” of asphalt and base depth of 8”-10”

There is no easy way to answer the cost of paving a driveway in Milpitas. There are many factors that go into estimating a paving project. The most important factor is the total square footage. The more square footage the lower the cost per square foot. Also, depending on the scope of the project the price will vary drastically. A brand-new driveway will need 4”-6” base installed prior to asphalt paving. However, an existing driveway or parking lot we can mill the top lawyer of asphalt and do an asphalt overlay, which is going to cost substantially less. We do offer free estimates so please contact us and we will be happy to provide you with a cost to install your asphalt surface.

Yes, we are fully insured, including workers' compensation insurance. We are licensed by the state of California. Our license #995715

Asphalt is made from aggregates, such as crushed stone and sand. The binder called bitumen binds the aggregates together, and asphalt pavement is black in color. Bitumen is produced from crude oil.

Yes, asphalt is one of the most recycled items in the world. Most of our asphalt mixes are from recycled asphalt with some added virgin asphalt.

Yes asphalt driveways are less expensive than a concrete driveway. Additionally, the cost per square foot decreases more with asphalt than concrete. We can pave a long driveway a lot faster then installing a concrete driveway. While both driveways are labor intensive, concrete requires exponential more labor to install.

Sometimes we will pave over existing asphalt surfaces. If the sub-base and the existing asphalt are stable, we can pave over it. An asphalt overlay is usually the most cost effect paving method. We will need to mill (scrape off) around transition areas such as sidewalks, roadways or driveway aprons.

Asphalt is a great material for parking lots and driveways. The appeal of asphalt is it more affordable then concrete but has almost the same longevity. A properly installed driveway will last 10-15 years in Milpitas. If you sealcoat your driveway every 3 years, seal cracks yearly and repair potholes quickly, you can expect your driveway to last 25 years.